0805 chip inductors document st197-1 revised 11/06/12 1. when ordering, specify tolerance, termination and testing codes: st336rad51n glz tolerance: f = 1% g = 2% j = 5% termination: l = rohs compliant silver-palladium-platinum glass frit. special order: s = tin-lead (63/37) over silver-platinum-glass frit. t = tin-silver-copper (95.5/4/0.5) over silver-platinum- glass frit. testing: z = cots h = screening per coilcraft cp-sa-10001 2. inductance measured using a coilcraft smd-a fxture in an agilent/hp 4286 impedance analyzer or equivalent with coilcraft-provided correla - tion pieces. 3. q measured at the same frequency as inductance using an agilent/hp 4291a with an agilent/hp 16197 test fxture or equivalents. 4. srf measured using an agilent/hp 8753es network analyzer or equivalent and a coilcraft smd-d test fxture. 5. dcr measured on a keithley 580 micro-ohmmeter or equivalent and a coilcraft ccf858 test fxture. 6. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. inductance 2 percent srf min 4 dcr max 5 imax part number 1 (nh) tolerance q min 3 (ghz) (ohms) (a) st336rad2n5jlz 2.5 @ 250 mhz 5 56 @ 1000 mhz >5.00 0.020 2.0 st336rad5n6jlz 5.6 @ 250 mhz 5 83 @ 1000 mhz 4.88 0.035 1.9 st336rad6n2jlz 6.2 @ 250 mhz 5 80 @ 1000 mhz 4.55 0.035 1.8 st336rad12njlz 12 @ 250 mhz 5 52 @ 500 mhz 2.80 0.045 1.6 st336rad16n_lz 16 @ 250 mhz 5,2 72 @ 500 mhz 2.40 0.060 1.4 st336rad18n_lz 18 @ 250 mhz 5,2 70 @ 500 mhz 2.20 0.060 1.4 st336rad20n_lz 20 @ 250 mhz 5,2 54 @ 250 mhz 2.05 0.060 1.4 st336rad27n_lz 27 @ 250 mhz 5,2,1 58 @ 250 mhz 2.00 0.070 1.3 st336rad30n_lz 30 @ 250 mhz 5,2,1 50 @ 250 mhz 1.74 0.095 1.1 st336rad39n_lz 39 @ 250 mhz 5,2,1 53 @ 250 mhz 1.60 0.110 1.0 st336rad48n_lz 48 @ 200 mhz 5,2,1 44 @ 150 mhz 1.40 0.095 1.1 st336rad51n_lz 51 @ 200 mhz 5,2,1 36 @ 150 mhz 1.28 0.120 0.9 core material ceramic terminations rohs compliant silver-palladium-platinum-glass frit. other terminations available at additional cost. ambient temperature C40c to +125c with imax current, +125c to +140c with derated current storage temperature component: C55c to +140c. packaging: C55c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles temperature coeffcient of inductance (tcl) +25 to +155 ppm/c moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) packaging 2000 per 7 reel plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.65 mm pocket depth these inductors provide exceptional q values, even at high frequencies. they have a ceramic body and wire wound construction to provide the highest srfs, tight inductance tolerance and batch consistency. chip inductors for critical applications st336rad this robust version of coilcrafts standard 0805hq series features high temperature materials that allow operation in ambient temperatures up to 155c. ? ? coilcraft, inc. 2012 1102 silv er lak e road car y, il 60013 phone 800-981-0363 fa x 847-639-1508 email c ps@coilcraft.com www . coilcraft-cps . com this pr oduct may not be used in medical or hig h risk applications without prior coilcraft appr oval. specifications subject to change without notice. please check our web site for latest infor mation.
st336rad series (0805) 0805 chip inductors 140 120 100 80 60 40 20 0 frequency (mhz) q f actor 10 100 1000 5000 20 nh 30 nh 48 nh 2.5 nh 6.2 nh 16 nh 1 10 0 100 frequency (mhz) inductance (nh) 1000 5000 48 nh 30 nh 20 nh 6.2 nh 2.5 nh 16 nh 70 60 50 40 30 20 10 typical l vs frequency typical q vs frequency a b c d max max max ref e f g h i j 000 0068 0060 000 0050 000 000 000 000 0030 inches , 1,3 1,5 0,51 1, 0,51 1,0 1,8 1,0 0,6 mm a b ov erall f i i g d e ter minal f j c h te rm inal wraparound: appro x 0 .015/0,38 b oth e nds recommended land p attern pic k and place mater ial irms derating suggested land pattern -40 -20 02 04 06 08 0 100 140 120 ambient temperature (c) 120 110 100 90 80 70 60 50 40 30 20 10 0 pe r cent of rated rms i 25c note: dimensions are before optional solder application. for maximum overall dimensions including solder, add 0.0025 in / 0,064 mm to b and 0006 in 0,15 mm to a and c document st1 revised 111611 ? ? coilcraft, inc. 2012 1102 silv er lak e road car y, il 60013 phone 800-981-0363 fa x 847-639-1508 email c ps@coilcraft.com www . coilcraft-cps . com this pr oduct may not be used in medical or hig h risk applications without prior coilcraft appr oval. specifications subject to change without notice. please check our web site for latest infor mation.
|
